Cleaning:
Clean unit thoroughly:
1. Clean Cosmetic: make sure no fingerprints and dirt is on plastic.
2. Clean CRT: make sure no residue is stick onto glass. (Note: must use CRT Cleaner)
3. Remove Stickers: Some unit might have sticker stick to bezel, or CRT. Remove all stickers. (Note: Do not Remove the Serial # and Manufacture label at the back of the monitor, for it contain information about the monitor)
4. Repaired Deep scratch on plastic bezel or housing by using plastic powder.
5. Wrap Monitor with plastic bag.
5. Send monitor to Final QC Area.